洪涝灾害条件下疏散交通生成预测方法

为有助于有关部门更准确预测洪涝灾害受灾民众的疏散量,结合非集计数据和集计数据的优点,提出分区集计数据的概念,设计了受灾区域分区方法,并通过意向偏好(SP)调查法对我国居民在洪涝条件下疏散交通需求数据进行调查。在此基础上,引入BP神经网络建立基于分区集计数据的疏散交通生成预测模型。利用调查数据进行实证分析发现,所设计方法取得了较好的预测效果,鲁棒性较好,平均相对预测误差仅为1.8%,其预测效果明显优于现有的非集计和整集计模型。     

考虑保护层响应的炼化过程系统风险动态转移模型

为适时、有效地控制炼化过程系统风险,以模糊Petri网(FPN)为基础,针对炼化系统动态退化性和系统中保护层对风险转移的干预性,建立考虑保护层响应的炼化过程系统风险动态转移模型。描述基于FPN的保护层作用动态机制,分析炼化系统在保护层干预下,从非正常干扰触发开始至炼化系统退化过程的风险变化趋势。最后通过正己烷缓冲罐案例分析验证模型。结果表明:正己烷缓冲罐在开始运行的30 000 h内,系统风险等级呈阶段性变化,在工作的前16 800 h,风险为Ⅰ级;第16 800~27 600 h,风险为Ⅱ级;第27 600~30 000 h,风险为Ⅲ级。     

基于CREAM和贝叶斯网络的空管人误概率预测方法

针对研究管制人因可靠性时存在的模糊性和片面性问题，采用认知可靠性与失误分析方法（CREAM）中的扩展预测法，计算10项管制通用任务的人误概率；在此基础上，以管制行为形成因子作为根节点构建贝叶斯网络，建立其与情景控制模式的不确定关系模型，对管制员在多任务中的人误概率进行预测。研究结果表明:在由相同评判者给出行为形成因子影响效应的前提下，由CREAM扩展预测法和构建贝叶斯网络的方法预测得到的多数任务的人误概率差异较大，从方法的客观性、合理性和适用性角度分析，贝叶斯网络在研究该问题时更具优势。     

分离岛式地铁站可用安全疏散时间计算与比较分析*

为研究大客流地铁车站风险因素，提出车站疏散能力分析的基本要素，结合某分离岛式地下车站，采用规范计算及精细网格模型对可用安全疏散时间进行计算与比较分析。结果表明:楼扶梯的通过效率、车站结构形式、疏散人员的数量及分布情况等因素对仿真模拟的结果产生影响；《地铁安全疏散规范》（GB/T 33668—2017）综合考虑了疏散至楼扶梯入口时间、楼扶梯上平均滞留时间及通道非均匀性偏差时间等，与仿真模拟结果的吻合度较高。研究结果可为国内类似车站的安全疏散设计及运营疏散组织提供参考。     

Emergency shutdown of fluidized bed reaction systems

With several industrial applications of fluidized bed technology recently commercialized worldwide, it becomes essential to develop safe operation methods for fluidized bed reaction systems (FBRSs) to prevent any influence on their process values, which lead to accidents. To preventing any disaster or malfunction in an FBRS, an emergency shutdown system (ESD) is initiated, closing the reaction system in case of any abnormality by effectively isolating the flammable gas. However, an ESD is also prone to the “inactivation problem,” in which in the case of failure it initiates the emergency shutdown, even when the operating conditions of the reaction system are abnormal. It is also vulnerable to a “malfunction problem,” where the emergency shutdown is performed even when the operating conditions of the reaction system are normal. In this study, these problems were solved by investigating a reaction system through the monitoring of appropriate parameters and setting up of trigger levels, which reflect the uniqueness of an FBRS using an ESD. The parameters were identified by analyzing the scenario leading to an accident. The trigger levels were determined as the points at which the loss is smaller in the presence of an ESD, as compared to the value of the loss function in the presence or absence of an ESD. Furthermore, the ESD design model was applied as a case study in the ammoxidation process of propylene. The results showed that an ESD can prevent an approximately 8 billion yen of loss due to accidents in plant operations, against an investment of 200 million yen.     

“T”型地铁换乘站多点火灾工况下综合火灾危险性研究

为探究大型地铁站多线路火灾场景中的综合危险性，采用火灾动力学软件FDS构建“T”型换乘站全尺寸模型，对不同火源位置、不同火源功率以及是否开启地铁排烟风机等12组工况进行数值模拟；采用性能化方法确定可用疏散时间，并通过综合火灾风险评估方法计算各工况总安全指数。结果表明:1号线站厅层和2号线站台层双点火灾为最不利火灾场景；1号线站台层和2号线站厅层双点火灾为相对安全火灾场景；火源功率的增大会增加地铁火灾危险性，但不同火源位置工况中的安全指数变化趋势相似；排烟模式开启前，1号线站厅层火灾会导致较大的火灾危险性；排烟模式开启后，地铁总安全指数显著上升且安全指数变化趋势改变，此时2号线站台层火灾会导致较大的火灾危险性。     

Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

Ammonium nitrate thermal decomposition with additives

Runaway reactions present a potentially serious threat to the chemical process industry and the community; such reactions occur time and time again often with devastating consequences. The main objective of this research is to study the root causes associated with ammonium nitrate (AN) explosions during storage. The research focuses on AN fertilizers and studies the effects of different types of fertilizer compatible additives on AN thermal decomposition. Reactive Systems Screening Tool (RSST) has been used for reactivity evaluation and to better understand the mechanisms that result in explosion hazards. The results obtained from this tool have been reported in terms of parameters such as “onset” temperature, rate of temperature and pressure rise and maximum temperature. The runaway behavior of AN has been studied as a solid and solution in water. The effect of additives such as sodium sulfate (Na₂SO₄) and potassium chloride (KCl) has also been studied. Multiple tests have been conducted to determine the characteristics of AN decomposition accurately. The results show that the presence of sodium sulfate can increase the “onset” temperature of AN decomposition thus acting as AN thermal decomposition inhibitor, while potassium chloride tends to decrease the “onset” temperature thus acting as AN thermal decomposition promoter.     

基于ACF-AMDF的气井环空液面回波特征提取方法

为了精确有效地提取声波法检测气井环空液位的回波周期，在分析环空中测试波的传播特征及基音周期检测的基础上，提出1种基于检测信号短时自相关函数(ACF)及平均幅度差函数(AMDF)的液面回波周期提取方法；利用自主搭建的室内模拟实验系统开展了不同初始环空压力下环空液位检测实验；对检测信号进行中心削波处理并计算ACF/AMDF，提取出液面回波周期并与理论计算值对比分析；同时分析了现场环空液位检测信号，提取其回波周期。研究结果表明:提出的新方法能有效地用于提取环空液面回波周期；室内实验中，该方法最大误差绝对值为1.54%；该方法能够有效抑制液面回波信号中的随机噪声及接箍反射波等，处理后的信号曲线在回波周期处峰值更加突出、集中，而在其他位置更加平滑，提高了对液面回波周期特征的辨识能力。     

石化装置安全仪表系统KooN表决结构的误跳车率定量分析

为了更准确量化安全仪表系统的误跳车率，基于联锁回路SIF中传感器、逻辑解算器、执行机构引发误跳车的不同失效机理和模型，考虑共因失效对误跳车率的影响，提出1种更符合实际并适用于异型KooN结构的新子系统误跳车率计算模型（STR of Non-identical Redundant System，SNRS）。针对SIF回路的误跳车率计算，建立了1种分析安全联锁SIF回路误跳车率（Reliability based Spurious Trip，RST）的计算框架。研究结果表明:以某聚丙烯装置第三反应器保护系统为例，将SNRS和RST方法与目前主流的多种计算方法进行数值计算对比，验证了方法的有效性，能够有效进行定量分析。